Shandong Kaitai Industry Technologies Company

Showing 1 - 10 of 15, total 2 pages [First] [Previous] [Next] [Last]

stainless steel shot
Specification: 0.2mm 0.3mm 0.4mm.......
Detail: Products Stainless Steel Shot Chemical Composition¡¡ C ¡Ü0.12% Mn ¡Ü2.00% Si ¡Ü1.00% Cr 17¡«19% Ni 7¡«10% S ¡Ü0.03% P ¡Ü0.035% Microhardness 41¡«59HRC(388¡«509HV) Ha...

cut wire hsot
Specification: 1.0mm 1.5mm
Detail: Products Cut Wire Shot Chemical Composition¡¡ C 0.45¡«0.75% Mn 0.40¡«1.20% Si 0.10¡«0.30% S £¼0.04% P £¼0.04% Microhardness 1.0mm£º51¡«53 HRC(525¡«561HV) 1.5mm£º41¡«45 HRC(388¡«436HV)...

steel grit
Specification: G10, G112,G14........
Detail: Products Steel Grit Chemical Composition ¡¡ C 0.70¡«1.20% Mn 0.35¡«1.20% Si 0.40¡«1.20% S ¡Ü0.05% P ¡Ü0.05% Microhardness GP:42¡«50HRC (399¡«509HV) GL:56¡«60HRC (620¡«713HV) GH:63...

steel shot
Specification: S780,S660.......
Detail: Products Steel Shot Chemical Composition C 0.70¡«1.20% Mn 0.35¡«1.20% Si 0.40¡«1.20% S ¡Ü0.05% P ¡Ü0.05% Microhardness Normal:40¡«50HRC (377¡«509HV) Special:52¡«56HRC (543¡«620HV) S...

qh69 series h-shaped steel of shot blasting machine
Specification: QH69 series
Detail: This series is a kind of roller shot-blasting machine. It mostly applies in the line of architecture, bridge, etc, which is used for relieving of stress and wiping surface rust of large girder shaped steel, H-shaped steel and ...

q48 single route series hanger stepping type continuous working
Specification: Q48 series
Detail: This series adopts multiple-step and rotating point fixed method to clean away the antiquated sand It is mainly used for the fitting of vehicles such as the bolster, side frame, coupler and coupler yokes. It can also be used...

qh69 series h-shaped steel of shot blasting machine
Specification: QH 69 series
Detail: This series is a kind of roller shot-blasting machine. It mostly applies in the line of architecture, bridge, etc, which is used for relieving of stress and wiping surface rust of large girder shaped steel, H-shaped steel and ...

qg series steel pipe wheel blast machinery
Specification: QG SREIES
Detail: QG Series Steel Pipe Wheel Blast Machinery is suitable for the surface treatment of steel pipe and related products, wiping up the oxide coating, welding slag to make the surface appear metallic sheen, increasing the surface a...

qt37 series double hangers pass-through shot blasting machine
Specification: QT37 series
Detail: The machinery type of this series fits for cleaning up section steel, steel structure, steel board architectural machine and other large jointing mechanical part. It is useful for wiping up the surface rusting, welding slag, o...

q15gn/q28gn series tumble belt type shot blasting machine
Specification: Q15GN/Q28GN
Detail: This series is used for removing the sand and the oxided surface of the workpieces such as the casting, forging as well as the weldment. Owing to the perfect protective measures, good shot blasting, a reasonable structure of t...


Showing 1 - 10 of 15, total 2 pages [First] [Previous] [Next] [Last]
1 2